===== SSOW01 - Aircraft Refuelling Operations ===== === Introduction === The purpose of this Safe System of Work (SSOW)] is to specify the procedure to be followed when re-fuelling the Tug and other aircraft. The primary purpose of this SSOW is to ensure that no persons are exposed to fire or explosion during aircraft re-fuelling operations. === The hazard === UL91 is a volatile fuel that can readily ignite and explode. The ignition source can be a spark of static electricity, the energy from a mobile phone, cigarette and matches, naked flame or stray electrical energy === Procedure to refuel === - Obtain key to tug hangar from the club house. - Unlock hangar. - Pick up fuel hut key and fuel log - Unlock the fuel hut. - Ensure the fuel pump is on. - Check the tank reading by using the key to operate the key switch below the display and compare with the fuel log - Ensure that mobile phones are switched off, there is no smoking, no naked lights, all engines are switched off and power supplies are isolated. - Close the barrier across the club access road - Remove the nozzle from its housing on the pump. Stretch out the hose to the aircraft. - Connect the anti-static clip to ensure equal electrical potential during fuel transfer. - Remove the fuel cap, place the nozzle in the filler pipe and refuel the aircraft. - On completion remove nozzle, replace the cap and remove the anti-static clip. - Return the hose to the pump hut and replace the nozzle on to the pump. - Open the barrier across the access road. - Check the tank reading as in “6”. - Complete the fuel log recording fuel used, on what and by whom. Sign the log. - Lock the pump hut. - Return to the tug hangar and replace fuel log and fuel hut key. - Lock the tug hangar and return keys to the club house === Information, instruction, briefing and authorisation === The tug master (or those nominated by the tug master) shall provide a brief and demonstration of the safe use of this re-fuelling facility. === Responsibilities === The tug master at the Scottish Gliding Centre === Authorisation === Approval and Review Certification ^Date^Name of Assessor / Reviewer| |2-10-2018|W Rossmann| |17-9-2020|J Dickson|